DXZeff's Computing Forum
DXZeff's Computing Forum
Search | Statistics | User Listing Discord | Forums | Language
You are logged in as a guest. ( logon | register )

All Hail Windows ME!
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Computer Speak -> Software (DOS & Windows)Message format
 
tedster
Posted 2020-01-05 3:19 PM (#1700)
Subject: All Hail Windows ME!



UMC U5S

Posts: 44
25
Location: Scotland
Recently build a pretty high end machine running Windows ME.

An Asus A8V Deluxe board.
Athlon A64 3800+ (underclocked to 1400Mhz and undervolted to 1.2v).
2 x 256 mb PC3200 in Dual Channel.
Winfast GF4 Ti4400 128mb
SB LIve Value (hee hee)
US Robotics Gigabit NIC
120GB SSD running off the onboard Promise SATA

It runs like a champ. A machine I could only dream about, back in the day!
Heck, even then you couldn't dream of disk performance like that.

So don't mock the ME





(winME.jpg)



Attachments
----------------
Attachments winME.jpg (117KB - 8 downloads)
Top of the page Bottom of the page
tedster
Posted 2020-01-05 3:24 PM (#1701 - in reply to #1700)
Subject: Re: All Hail Windows ME!



UMC U5S

Posts: 44
25
Location: Scotland
Oh, I forgot, it's also got a GOTEK floppy in there, so's I can boot into some DOSage should I wish.
Top of the page Bottom of the page
tedster
Posted 2020-01-05 7:04 PM (#1702 - in reply to #1700)
Subject: RE: All Hail Windows ME!



UMC U5S

Posts: 44
25
Location: Scotland
Well, I tried using the forum code to show a youtube vid.

It wouldn't work, so here's a direct link.

https://www.youtube.com/watch?v=FwOSW_O0Izw
Top of the page Bottom of the page
DXZeff
Posted 2020-01-06 5:08 PM (#1703 - in reply to #1702)
Subject: Re: All Hail Windows ME!



Pentium II

Posts: 481
100100100100252525
Location: Hull, UK
Nice solitaire machine, I guess, the only think I'd keep would be WinME and that GeForce, but it's whatever works at the end of the day.

WinME does get a raw deal, because with enough patience to set it up properly it can work and can even be quite snappy.
Top of the page Bottom of the page
tedster
Posted 2020-01-06 11:57 PM (#1705 - in reply to #1700)
Subject: Re: All Hail Windows ME!



UMC U5S

Posts: 44
25
Location: Scotland
Ha ha, yes I've seen you haven't had much luck with later Athlons! I have to say, this is pretty solid though and there's no need for the massive 5v rail that you need with the XP chips.
Anyway, it does the job for me. It plays all the games I wanted it to, so I guess you can't ask for more of it than that.

It also doubles up as a nice Winamp jukebox!
Top of the page Bottom of the page
DXZeff
Posted 2020-01-07 5:24 PM (#1706 - in reply to #1705)
Subject: Re: All Hail Windows ME!



Pentium II

Posts: 481
100100100100252525
Location: Hull, UK
Yeah, man, it's like I said, whatever works, really.
Strangely I had no issues with the 754 chips aside from AMD screwing over the low-end range towards the end of its life, 939 is a different story though.
Top of the page Bottom of the page
tedster
Posted 2020-01-08 12:38 AM (#1708 - in reply to #1706)
Subject: Re: All Hail Windows ME!



UMC U5S

Posts: 44
25
Location: Scotland
I've never used a s754 went straight to s939 from the XP chips.

Next step is an XP gamer!
Top of the page Bottom of the page
tedster
Posted 2020-01-08 1:24 PM (#1710 - in reply to #1700)
Subject: Re: All Hail Windows ME!



UMC U5S

Posts: 44
25
Location: Scotland
No, next step, is a clean install on this machine. I realised it's been transported across three different motherboards, all with different chip-sets! It's had a bunch of graphics cards in there and some of the drivers won't un-install (Nvidia) Pretty good going really as it's reasonably stable. Well, more than it should be anyway! :D
Top of the page Bottom of the page
DXZeff
Posted 2020-01-08 10:31 PM (#1711 - in reply to #1710)
Subject: Re: All Hail Windows ME!



Pentium II

Posts: 481
100100100100252525
Location: Hull, UK
That was how I did it, though, went right from 462 to 939. In the case of 754 it might have solely been that the expectation was lower, so it wasn't such a big deal that you wound up with a CPU slightly slower than the K7 had been and no real upgrade path, the 939 boards on the other hand landed you with an unstable 'dual core' along with AGP and DDR1.

Indeed, keeping an OS across multiple boards like that rarely ends well in the long term, may as well fix it now before it inevitably goes wrong.
Top of the page Bottom of the page
tedster
Posted 2020-01-08 11:13 PM (#1712 - in reply to #1711)
Subject: Re: All Hail Windows ME!



UMC U5S

Posts: 44
25
Location: Scotland
Did a clean install this evening, only used DX8.1 instead of the full-fat 9.0c along with only the "right" drivers versions trialed in the previous build. Went like a charm, not one crash or bsod. System feels pretty slick so I'm glad I made the effort. I think I'll make an image for future refreshes.

I sacked the AMD path as soon as the S775 C2D's came out. Which will be the subject of my XP build, as I've a nice E8400 and a decent Asus board ready.

Top of the page Bottom of the page
tedster
Posted 2020-01-09 4:00 PM (#1713 - in reply to #1700)
Subject: RE: All Hail Windows ME!



UMC U5S

Posts: 44
25
Location: Scotland
Took a disk image, using Macrium Reflect. So I've a "clean slate" to revert to, should I need.

I just love using those 120GB SSD's. They only cost about £16 new, sit under the capacity limit, work a treat in IDE mode on an adapter card and you can just slot them in a USB adapter for imaging or transfers.
I have it as a 20GB for C: and the rest as D: for games. With "No CD" cracks you can always muck about with your OS partition, change your OS even, leaving your games mostly intact and playable.
Purists won't like them but IDE drives are getting harder to find and pricey. At 16 quid a pop, who cares about TRIM and alignment bollox?
Top of the page Bottom of the page
tedster
Posted 2020-01-10 1:28 PM (#1721 - in reply to #1700)
Subject: RE: All Hail Windows ME!



UMC U5S

Posts: 44
25
Location: Scotland
So, I "restored" my new disk image onto another spare SSD. It worked just fine, I didn't know how Macrium would go with Windows ME. I thought it better to find out now!

I took the opportunity to tidy up in there a bit, that involved fitting the SSD into a 3.5" adapter that I found and fitting a better case intake fan!

So I consider the build complete and well happy I am too.





(winme_build.jpg)



Attachments
----------------
Attachments winme_build.jpg (123KB - 8 downloads)
Top of the page Bottom of the page
tedster
Posted 2020-01-10 7:28 PM (#1722 - in reply to #1700)
Subject: RE: All Hail Windows ME!



UMC U5S

Posts: 44
25
Location: Scotland
Rooting through the parts hoard, in the shed. I came across these beauties!

Including the original software disks.

Looks like a NEED FOR SPEED mega-sesh is on the cards for weekend!





(racing.jpg)



Attachments
----------------
Attachments racing.jpg (73KB - 8 downloads)
Top of the page Bottom of the page
tedster
Posted 2020-01-12 4:34 PM (#1725 - in reply to #1722)
Subject: Re: All Hail Windows ME!



UMC U5S

Posts: 44
25
Location: Scotland
Had a play with a Radeon 9600 Pro 128mb card. Using the Catalyst 7-991 driver set, it ran pretty damn good too! It's quite a bit faster than my Ti4400 but that provides a more consistent experience, so it's staying! I was kinda torn though.

It's handy, working with disk images! You can just restore your "clean" one without all the re-install hassles.

I found a 3000+ A64 CPU in the hoard too, along with a case badge sticker! Sorted! So I swapped out that big 3800+ and I'm running the 3K chip at its default 1.8GHz.

Edited by tedster 2020-01-12 4:45 PM
Top of the page Bottom of the page
tedster
Posted 2020-01-18 1:31 AM (#1749 - in reply to #1725)
Subject: Re: All Hail Windows ME!



UMC U5S

Posts: 44
25
Location: Scotland
There is a thread over on Vogons about the suitability about using these SSD's with win 9x.

Some voiced concern over the lack of "TRIM" support causing potential early drive failure. Who gives a shit? Back in the day you were lucky to get 3 months out of a bloody IBM Deathstar HDD. I've got several dead ones in the hoard. Why do I keep shit like that? Must be some kind of fetish.

Anyway, if you take an image, then restore it using Macrium Reflect. It TRIMS the drive on restore. So, do that if it bothers you.

Or format it with a gig of free space, the drive will likely shift any fucked blocks there and you'll never notice.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software
© 2002-2020 PD9 Software